The official BQ Aquaris X2 PRO Stock Firmware is here with driver tool and guide. BQ_Aquaris X2 PRO is now available on the market and after some weeks or days will available lots of mods, custom ROM and TWRP. That’s why always keep BQ Aquaris X2 PRO firmware to repair. You can also update Aquaris X2 PRO smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick BQ Aquaris X2 PRO.
Download Latest BQ Aquaris X2 Pro Stock Firmware
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for BQ Aquaris X2 PRO. By installing this BQ Aquaris X2 PRO stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick BQ Aquaris X2 PRO. Stock firmware doesn’t void the warranty of your device. The BQ Aquaris X2 PRO Firmware is now available for all regions. So let’s go the instruction to download BQ Aquaris X2 PRO Firmware.
BQ Aquaris X2 PRO Specification:
The previous year, BQ released Aquaris X2 PRO with Android 8.1 (OREO). This device runs on 1.8 GHz octa-core Qualcomm SDM660 Snapdragon 660 processor and it comes with 4/6GB of RAM. Aquaris X2 PRO comes with 5.65 inches LTPS IPS LCD capacitive touchscreen of 1080 x 2160 pixels. It has 32/64 GB of internal storage.
The BQ_Aquaris X2 PRO brings Dual 12-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for perfect selfies. It has Non-removable Li-Ion 3100 mAh battery. The sensors in this device are a Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass.
- Android Version: Android 8.1
- Android Name: OREO
- UI Version: Stock UI
- Device name: BQ Aquaris X2 Pro
- Country: All.
- Status: Official
- File Size: 1.32 GB
BQ Aquaris X2 Pro Firmware Tool, Driver link
We have shared the latest firmware, Qualcomm flash tool and Qualcomm driver to you can download directly from our site.
|Model Name:||File Size:||Download File:|
|BQ Aquaris X2 Pro||1.33 GB||1.2.2_20180611-1702-zangyapro_bq-user-485-Fastboot-FW
Guide To Install Firmware:-
- Download Tool, Driver, Firmware (zip file).
- Extract firmware.zip, Tool, driver.
- Install USB drivers.
- Now open the QFIL.exe.
- Then select Browse under the Programmer path and Load “.MBN” file from firmware folder.
- Now switch off the phone and Hold Volume up + Down + Power.
- Select port in QFIL tool.
- Now hit the download button and wait for flashing.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
Note: The first time it takes 5-10 minutes to boot.