The official BQ Aquaris X2 Stock Firmware is here with driver tool and guide. BQ_Aquaris X2 is now available on the market and after some weeks or days will available lots of mods, custom ROM and TWRP. That’s why always keep BQ Aquaris X2 firmware to repair. You can also update Aquaris X2 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick BQ Aquaris X2.
Download Latest BQ Aquaris X2 Stock Firmware
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for BQ Aquaris X2. By installing this BQ Aquaris X2 stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick BQ Aquaris X2. Stock firmware doesn’t void the warranty of your device. The BQ Aquaris X2 Firmware is now available for all regions. So let’s go the instruction to download BQ Aquaris X2 Firmware.
BQ Aquaris X2 Specification:
The previous year, BQ released Aquaris X2 with Android 8.1 (OREO). This device runs on 1.8 GHz octa-core Qualcomm SDM636 Snapdragon 636 processor and it comes with 3/4GB of RAM. Aquaris X2 comes with 5.65 inches LTPS IPS LCD capacitive touchscreen of 1080 x 2160 pixels. It has 32/64 GB of internal storage.
The BQ_Aquaris X2 brings Dual 12-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for perfect selfies. It has Non-removable Li-Ion 3100 mAh battery. The sensors in this device are a Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass.
- Android Version: Android 8.1
- Android Name: OREO
- UI Version: Stock UI
- Device name: BQ Aquaris X2
- Country: All.
- Status: Official
- File Size: 1.32 GB
BQ Aquaris X2 Firmware Tool, Driver link
We have shared the latest firmware, Qualcomm flash tool and Qualcomm driver to you can download directly from our site.
|Model Name:||File Size:||Download File:|
BQ Aquaris X2
Guide To Install Firmware:-
- Download Tool, Driver, Firmware (zip file).
- Extract firmware.zip, Tool, driver.
- Install USB drivers.
- Now open the QFIL.exe.
- Then select Browse under the Programmer path and Load “.MBN” file from firmware folder.
- Now switch off the phone and Hold Volume up + Down + Power.
- Select port in QFIL tool.
- Now hit the download button and wait for flashing.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
Note: The first time it takes 5-10 minutes to boot.