[FIRMWARE] Stock Firmware For Coolpad Note 3 Lite

The official Coolpad Note 3 Lite Stock Firmware is here with driver tool and guide. Coolpad Note 3 Lite is now available on the market and after release TWRP and root method, you can install lots of mods, custom ROM and much more. To keep your device safe always save Coolpad Note 3 Lite firmware to repair.

Download Stock Firmware For Coolpad Note 3 Lite

This firmware for if your device brick or bootloop after installing custom ROM’s kernels or anything customized this firmware will revert back to stock ROM.

Coolpad Note 3 Lite Specification:

The Coolpad Note 3 Lite was launched in 2016, January. The phone comes with a touch screen 5.0 inches with a resolution of 720 x 1280 pixel. The Coolpad Note 3 Lite is powered by 1.3GHz quad-core MediaTek MT6735 processor and it comes with 3GB of RAM. phone packs 16GB of internal storage can be expanded up to 32GB via a microSD card. The Coolpad note 3 Lite comes with the main camera of 13 megapixels on the back and a front 5 megapixels for a selfie.

Coolpad Note 3 Lite runs Android 5.1 Cool UI and is powered by a Non-removable Li-Ion 2500 mAh battery. It measures 140.80 x 70.40 x 8.90 (height x width x thickness) and weighs 152.00 grams. Sensors in the phone include a Proximity sensor, Ambient light sensor, Accelerometer, and Gyroscope.

Firmware Details:

  • Android Version: Android Lollipop 5.1.
  • Ui Version: Cool UI
  • Release Date: 22.Apr.2016
  • Model: Coolpad Note 3 Lite
  • Status: Official
  • Type: “.Zip” file & Tool.
  • File Size: 1.3GB

⇓⇓ Download Coolpad Note 3 Lite Firmware and Tool ⇓⇓

coolpad_note_3_lite_v15_220416.zip

Firmware Update Guide:

  • Extract Downloaded Zip File via Winrar and 7zip.
  • Install USB Drivers.
  • Now Open The SP Flash Tool & Click The Firmware update Tab Button.
  • Then Click Scatter-Loading Button & Browse And Select The MT6735_Android_scatter.txt File From Firmware Folder.
  • Now Hit The Download Button.
  • Switch Off Your Phone & Connect Your Phone To The PC.
  • After The Flashing A Green Tick Will Be Appear.
  • Disconnect Your Phone And Again Connect Yours To The PC.
  • Install & Open minimal_adb_fastboot_v1.2_setup.exe on your PC & Type or Paste this command to Verify Your Phone Detected:
adb devices
  • Now Type or Paste this command:
adb shell fctest system reboot
  • Now the phone is switched on.

Note:- Frist Time Its Takes 5-10 Minutes To Boot.

If Any Problem Please Comment Below…..FOR MORE UPDATE PLEASE LIKE OUR FACEBOOK , GOOGLE AND TWITTER PAGE
CoolpadCoolpad Note 3 LiteFirmwareLollipopStock Firmware
Comments (36)
Add Comment
  • Raz Sutradhar

    my coolpad n3 l i install the stock rom with sp flash tool its done the flashing prossed sucess fully done but i swich on the phone and come on display up and down in a black window

    • Raja

      connect your phone in up and down in a black window with pc download adb tool http://d-h.st/Xf7o unzip open cmd windows there by shift + mouse right now paste this command-

      adb shell fctest system reboot

      after it your phone will run normally

    • Shravana Shravana

      Bhai mera bhi same problem kya karun bolo na

      • Raz Sutradhar

        mm install karlo

  • Raz Sutradhar

    Tnx Bro my phone is on now but my phone is showing INVALID IMEI now plz halp me and 3g and 4g not working

  • suriya prakash

    thanks very much bro

    • Akash Bagchi

      welcome

  • Shravana Shravana

    after flashing my phone not opening (after booting) stuck only displaying up/ down only.

  • Shravana Shravana

    my coolpad n3 l i install the stock rom with sp flash tool its done the flashing prossed sucess fully done but i swich on the phone and come on display up and down in a black window

  • Shravana Shravana

    plz help meeeeeee boys

  • Atul Kumar

    mera phone automatically on ho rha hai or upar factory likha hai or end mai fastmmi mode
    kiya kru kuch btao plz or jb mai flash tool ka use krta hu download pr click krta hu to muje last mai select scater filr for the target baseband chip likha aa rha hai plz btao kiya kru kuch smj ni aa rha hai abhi new phone liya tha feb mai or ye ho gya plz help me some one plz

    • rajajana

      connect your phone in up and down in a black window with pc download adb tool http://d-h.st/Xf7o unzip open cmd windows there by shift + mouse right now paste this command-

      adb shell fctest system reboot

      after it your phone will run normally

  • Atul Kumar

    Maine phone second time flash kiya but first time Maine Jo file ka backup Lena chahiye tha vo Ni Liya or second time mai Mera imei no Ni as rha but network show ho the hai mobile mai or invalid imei so ho rha hai or sayad system/bin file not found as rha hai kuch bhi me rha hu to or *#*#3646633#*#* Dail or rha hu or cds or radio mai jakr imei change kiya to ye show ho rha hai kiya Kru btao plz help me Bhai plz Abhi phone ko 6 month he hue hai plz help mai ghr or Ni bta skta hu ki mobile khrb ho gaya hai plz help me anyone plz ye imei Maine phone ka he use kiya hai but kuch Ni ho rha hai or mere pass pause Bhai Ni hai low family services belong kiya hu plz help me

    • Uber Illusion

      You need to have a space between “AT+” & “EGMR=1,7,””…
      For Sim / Radio 1 it is EGMR=1,7,”
      For Sim / Radio 2 it is EGMR=1,10,”
      EG:
      SIM1- AT+ EGMR=1,7,””
      SIM2- AT+ EGMR=1,10,””

      hope this helps!

  • Chandu Kanth

    is it posible for windows 7 to load scatter file

    • rajajana

      yes

  • Deepu

    My phone stucked up in boot logo and restarts infinite times until it’s run out of charge
    Help me solve this

    • Akash Bagchi

      install as new, in SPflash tool select download and format mode then install the firmware.

  • Sandip dawande

    Dear sir

    My coolpad note 3 phone continue start & stop behaviour please tell me solution for this problem

    • Akash Bagchi

      install as new, in SPflash tool select download and format mode then install the firmware.