Nougat – GizRom https://www.gizrom.com Android ROMs, Firmwares, OTA, Guide & Downloads Sun, 02 Dec 2018 11:05:45 +0000 en-US hourly 1 https://wordpress.org/?v=5.4.2 https://www.gizrom.com/wp-content/uploads/2019/02/favi-gizrom-100x100.png Nougat – GizRom https://www.gizrom.com 32 32 Download And Install Official Flyme OS 6 For Meizu E3 https://www.gizrom.com/official-flyme-os-6-for-meizu-e3/?utm_source=rss&utm_medium=rss&utm_campaign=official-flyme-os-6-for-meizu-e3 https://www.gizrom.com/official-flyme-os-6-for-meizu-e3/#respond Sun, 10 Jun 2018 16:24:29 +0000 https://www.gizrom.com/?p=15956 Official Flyme OS 6 For Meizu E3 - Download And Install Official Flyme OS 6 For Meizu E3

Download And Install Official Flyme OS 6 For Meizu E3, it is the latest update for Meizu E3 that based on Android 7.1.1 nougat.

The post Download And Install Official Flyme OS 6 For Meizu E3 appeared first on GizRom.

]]>
Official Flyme OS 6 For Meizu E3 - Download And Install Official Flyme OS 6 For Meizu E3

Install Official Flyme OS 6 For Meizu E3Official Flyme OS 6 For Meizu E3

Good news for Meizu E3 users. You can now install Flyme OS 6 for Meizu E3. Flyme 6 OS was recently released for Meizu devices based on Android 6.0 Marshmallow. Flyme 6 OS has many features such as theme, new user interface, Meizu launcher, Flyme Weather application, and more, as well as other performance improvements and optimizations. Now, in addition to the official Meizu devices, Flyme 6 OS is also suitable for many Android devices. The latest version of Flyme 6 is now available for the Meizu E3. You can now download and install Official Flyme OS 6 for Meizu E3 from the link given below.


Also see: Download Public Beta Nougat Flyme 6 OS For Meizu Smartphone


This Flyme OS is an official but it comes via custom ROM for Meizu E3. We share the direct download link below. To flash Flyme OS 6 on Meizu E3 need to install TWRP recovery or any custom recovery. if you already have a custom recovery then skip this step and direct follow the step to install custom ROM. so let’s go guide to install Official Flyme OS 6 for Meizu E3.

Flyme OS details:

  • Version: Flyme 6.3.2.2A
  • MD5: 0dc2ea4356f9b71024d53203f05e3186
  • File size: 2045MB
  • Release time: 2018-06-07

Requirements:-

  • First, take a complete backup of your device.
  • Make sure installed TWRP recovery on your device.
  • Need 60-70% charge for flashing on your device.
  • Download Flyme OS ROM, Gapps from below.
  • Read the instructions carefully.

Download Flyme OS 6 On Meizu E3:

Flyme OS 6: update.zip

Gapps: opengapps


You may also like: Install Public Second Beta Flyme 6 For Meizu Smartphone


Guide To Install:-

  • Download “ update.zip ” copy it to external memory.
  • Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click Install.
  • Then navigate to the update.zip file, which you downloaded before.
  • Swipe to install the ROM.
  • Once complete, again back to a recovery menu and install Gapps file.
  • After the process ” reboot ” your device.
  • The first-time Reboot will take 4-5 minutes to boot, don’t interrupt the process.

Also see: Flyme OS 4.5 [Android 5.1.1] For Lenovo Vibe Z2 Pro


If you have any problem comment below in the comment box, also, you can reach us on our official Facebook page.

The post Download And Install Official Flyme OS 6 For Meizu E3 appeared first on GizRom.

]]>
https://www.gizrom.com/official-flyme-os-6-for-meizu-e3/feed/ 0
Download Latest LG K8 2017 Stock Firmware And LGUP Tool https://www.gizrom.com/latest-lg-k8-2017-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=latest-lg-k8-2017-stock-firmware https://www.gizrom.com/latest-lg-k8-2017-stock-firmware/#respond Sun, 01 Apr 2018 11:58:14 +0000 https://www.gizrom.com/?p=13436 Latest LG K8 2017 Stock Firmware

Download Latest LG K8 2017 Stock Firmware And LGUP Tool, LG Driver For Unbrick LG K8 2017 device and back to Android 7.0 nougat using LG K8 2017 firmware.

The post Download Latest LG K8 2017 Stock Firmware And LGUP Tool appeared first on GizRom.

]]>
Latest LG K8 2017 Stock Firmware

The official LG K8 2017 Stock Firmware is here with LG driver and LGUP tool and guide. LG K8 (2017) is now available on the market and already lots of mods, custom ROM and TWRP are available. That’s why always keep LG K8 2017 firmware to fix software issues. You can also update LG K8 (2017) smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick LG K8 2017.

Download Latest LG K8 2017 Stock Firmware And LGUP Tool

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware of LG K8 2017. By installing this LG K8 2017 stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick LG K8 2017. Stock firmware doesn’t void the warranty of your device. The LG K8 2017 Firmware is now available for all regions. So let’s go the instruction to download and install LG K8 2017 Firmware.

LG K8 2017 Specification:

LG K8 2017 specification: The previous year, LG released K8 2017 with Android 7.0 (Nougat). This device runs on 1.25GHz quad-core processor and it comes with 2GB of RAM. K8 2017 comes with 5.0 Inch IPS LCD capacitive touchscreen of 720 x 1280 pixels. It has 16 GB of internal storage.

The LG K8 (2017) brings 13-megapixel rear camera to capture a good quality image and 5-megapixel in front facing the camera for average quality selfies. It has Removable Li-Ion 2500 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor, Fingerprint and Gyroscope.

GIZROM Recommendations:

LG K8 2017 Firmware Details:-

  • Android Version:  Android v7.0 (Nougat)
  • Release Date: 29.May.2017
  • Device: LG K8 2017
  • Model number: H918
  • Status: Official
  • Country: All.
  • Type: “.KDZ ”

Pre-requisites:-

  • This firmware work only on LG K8 (2017) H918 version.
  • Need your device at least to 50-60% charged, as the process may take a while.
  • Read the instruction.

Firmware, Tool and Driver link:

We have uploaded latest firmware, LGUP Tool and LG driver in a single zip file so you can download directly from our site. This firmware helps you to many software issues and also unbrick LG K8 2017.

LG driver ⇒ Latest LG Drivers

LGUP Tool ⇒ LG Flash tool

Firmware file ⇒ US21512b_00_1207.kdz

Guide To Install Firmware:-

  • Download Stock Firmware, LG Drivers,  LG Flash tool.
  • Now install LG driver on your computer.
  • Then Install LGUP.msi file.
  • Go to C:\Program Files (x86)\LG Electronics\LGUP\ and create a new “model” name folder.
  • Copy DLL files into this folder.
  • Run the ” .reg ” file which is provided in the zip file. Select ” Yes ” if you see a prompt and then select “Ok“.
  • Switch off your device and reboot into download mode [connect USB cable by holding Volume UP key].
  • Now open LG UP software that you installed.
  • Then click on upgrade and select KDZ firmware file.

LGUP Tool

  • Now hit the Start button.

LGUP Tool

  • After the flashing, your device will automatically reboot.
  • Disconnect your phone and enjoy.

Note: The first time it takes 5-10 minutes to boot.

If face any problem please comment below, we will happy to help you.

The post Download Latest LG K8 2017 Stock Firmware And LGUP Tool appeared first on GizRom.

]]>
https://www.gizrom.com/latest-lg-k8-2017-stock-firmware/feed/ 0
Download Latest BLU Vivo X Stock Firmware, Tool, Driver https://www.gizrom.com/latest-blu-vivo-x-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=latest-blu-vivo-x-stock-firmware https://www.gizrom.com/latest-blu-vivo-x-stock-firmware/#respond Fri, 30 Mar 2018 08:20:21 +0000 https://www.gizrom.com/?p=13402 Latest BLU Vivo X Stock Firmware

Download Latest BLU Vivo X Stock Firmware, SP Flash Tool and MTK Driver For Unbrick BLU Vivo X device and back to Android 7.0 nougat using BLU Vivo X firmware.

The post Download Latest BLU Vivo X Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
Latest BLU Vivo X Stock Firmware

The official BLU Vivo X Stock Firmware is here with driver tool and guide. BLU_Vivo X is now available on the market and after some weeks or days will available lots of mods, custom ROM and TWRP. That’s why always keep BLU Vivo X firmware to repair. You can also update Vivo X smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick BLU Vivo X.

Download Latest BLU Vivo X Stock Firmware

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware of BLU Vivo X. By installing this BLU Vivo X stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick BLU Vivo X. Stock firmware doesn’t void the warranty of your device. The BLU Vivo X Firmware is now available for all regions. So let’s go the instruction to download BLU Vivo X Firmware.

BLU Vivo X Specification:

BLU Vivo X specification: The previous year, BLU released Vivo X with Android 7.0 (Nougat). This device runs on 2.6GHz octa-core MediaTek Helio P25 processor and it comes with 4GB of RAM. Vivo X comes with 6.0 Inch IPS LCD capacitive touchscreen of 720 x 1440 pixels. It has 64 GB of internal storage.

The BLU_Vivo X brings Dual 13-megapixel rear camera to capture a good quality image and 20-megapixel in front facing the camera for perfect selfies. It has Non-removable Li-Po 4010 mAh battery. The sensors in this device are a Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass.

You May Also Like:

BLU Vivo X Firmware Details:

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 31.01.2018
  • Device name: BLU Vivo X
  • Country: All.
  • Status: Official
  • File Size: 2.04 GB

Firmware, Tool and Driver link:

We have uploaded latest firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site. This firmware helps you to many software issues and also unbrick BLU Vivo X.

Download Firmware ⇒ BLU_Vivo_X_V0230WW_MT6757_V7.0.04.00_T6183_31012018.zip

Guide To Install Firmware:-

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Latest BLU Vivo X Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/latest-blu-vivo-x-stock-firmware/feed/ 0
Download BLU Studio View XL Stock Firmware, Tool, Driver https://www.gizrom.com/blu-studio-view-xl-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=blu-studio-view-xl-stock-firmware https://www.gizrom.com/blu-studio-view-xl-stock-firmware/#respond Wed, 28 Mar 2018 11:23:22 +0000 https://www.gizrom.com/?p=13374 BLU Studio View XL Stock Firmware, Tool, Driver

Download BLU Studio View XL Stock Firmware, SP Flash Tool and MTK Driver For Unbrick BLU Studio View XL device and back to Android 7.0 nougat using BLU Studio View XL firmware.

The post Download BLU Studio View XL Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
BLU Studio View XL Stock Firmware, Tool, Driver

The official BLU Studio View XL Stock Firmware is here with driver tool and guide. BLU Studio View XLis now available on market and after some weeks or days lots of mods, custom ROM and TWRP will available. That’s why always keep BLU Studio View XL firmware to repair. You can also update Studio View XL smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick BLU Studio View XL.

BLU Studio View XL specification: The previous year, BLU released Studio View XL with Android 7.0 (Nougat). This device runs on 1.3 GHz quad-core MediaTek MT6580 processor and it comes with 1GB of RAM. Studio View XL comes with 5.7 Inch touchscreen display of 720 x 1440 pixels. It has 16 GB of internal storage.

The BLU Studio View XL gives you dual 13-megapixel rear camera to capture a good quality image and 05-megapixel in front facing the camera for selfies. It has Removable Li-Po 3000 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor, Gyroscope and fingerprint.

BLU Studio View XL Stock Firmware

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the stock firmware of BLU Studio View XL. By installing this BLU Studio View XL stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick BLU Studio View XL. Stock firmware doesn’t void the warranty of your device. The BLU Studio View XL Firmware is now available for all regions. So let’s go the instruction to download BLU Studio View XL Firmware.

You May Also Like:

Firmware Details:-

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 12.03.2017
  • Device name: BLU Studio View XL
  • Country: All.
  • Status: Official
  • File Size: 1.37 GB

Download BLU Studio View XL Firmware

We have uploaded latest Studio View XL firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site. This firmware helps you to many software issues and also unbrick BLU Studio View XL.

Firmware ⇒ BLU_S790Q_V7.0.04.01_12-03-2018.zip

Guide To Install Firmware:-

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download BLU Studio View XL Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/blu-studio-view-xl-stock-firmware/feed/ 0
Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5A https://www.gizrom.com/aokp-nougat-rom-for-redmi-5a/?utm_source=rss&utm_medium=rss&utm_campaign=aokp-nougat-rom-for-redmi-5a https://www.gizrom.com/aokp-nougat-rom-for-redmi-5a/#comments Sat, 24 Mar 2018 11:08:05 +0000 https://www.gizrom.com/?p=13330 AOKP Nougat ROM For Redmi 5A - Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5A

Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5A. This ROM is almost fully stable but availabl with the features of AOKP 7.1.2 Nougat ROM.

The post Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5A appeared first on GizRom.

]]>
AOKP Nougat ROM For Redmi 5A - Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5A

Install 7.1.2 AOKP Nougat ROM for Redmi 5A

Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5ARedmi 5A got the Android 7.1 Nougat update officially. Redmi 5A launched with MIUI 9 Nougat version, but many users want to update the device to the new Android 7.1 Custom ROMs Like RR, AOKP then you can try 7.1.2 AOKP Nougat ROM For Redmi 5A. So today we share Stable 7.1.2 AOKP Nougat ROM For Redmi 5A. This custom ROM is fully stable and based on the latest Android 7.1 Nougat with the most recent security patch.

Xiaomi Redmi Note 5A packs octa-core Qualcomm Snapdragon 625 processor and will come with 2GB of RAM. This device has 5.5 inches HD capacitive touchscreen. The display resolution of 720x 1280pixels. This device has Dual 13megapixel rear with LED flash camera for taking good-quality photos and 5-megapixel front camera for a perfect selfie. It has Non-removable Li-Ion 3000 mAh battery. This will be another budget device from Xiaomi which will have an impact on budget range smartphones.

AOKP based on Android OS with a fully optimized kernel and light UI to get maximum performance. So AOKP is one of the best custom Android 7.1 Stable AOKP Nougat ROM For Redmi 5A Riva. Thanks to XDA members ” ataberkozen ” to share this ROM.

Features of AOKP Nougat ROM:-

  • Simple UI.
  • Super Smooth.
  • Dialer fixed
  • VOLTE Working
  • Camera Works

you can call this as a stable custom ROM for Redmi 5A RIVA. So you can use this ROM as your daily driver.

Recommended For You:

Pre-requisites:-

  • Required Custom Recovery.
  • Backup Your Current ROM & all-important Data.
  • Need your device at least to 60% charge, as the process may take a while.
  • Download AOKP_ROMzip, file.
  • Read Instruction.

AOKP Nougat ROM For Redmi 5A RIVA Link:

Guide To Install:-

  • Download and copy all files to external or internal memory.
  • Turn off your phone and enter recovery mode by Volume Down + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click install.
  • Then navigate to the Rom.zip file, which you downloaded before.
  • Select the AOKP_Nougat.zip file from the list to flash it.
  • Swipe for flashing.
  • Wait for processing complete.
  • Reboot your device & enjoy.
  • It takes 5-10 minutes to boot, please don’t interrupt the process.
If you face any problems then comment below, we will be happy to help you !!!

The post Guide To Install 7.1.2 AOKP Nougat ROM for Redmi 5A appeared first on GizRom.

]]>
https://www.gizrom.com/aokp-nougat-rom-for-redmi-5a/feed/ 2
Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro https://www.gizrom.com/lineageos-14-1-rom-for-redmi-note-5-pro/?utm_source=rss&utm_medium=rss&utm_campaign=lineageos-14-1-rom-for-redmi-note-5-pro https://www.gizrom.com/lineageos-14-1-rom-for-redmi-note-5-pro/#comments Fri, 23 Mar 2018 08:39:58 +0000 https://www.gizrom.com/?p=13296 Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro

Install Android 7.1.2 LineageOS 14.1 ROM for Redmi Note 5 Pro also it comes with preinstalled Gapps. You can get much more performance and reliability in this ROM.

The post Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro appeared first on GizRom.

]]>
Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro

Install LineageOS 14.1 ROM For Redmi Note 5 ProInstall Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro

Here is the most popular Lineage OS 14.1 ROM for Redmi Note 5 Pro. Lineage OS 14.1 is based on Android 7.1.2 Nougat version. You can get much more performance and reliability in this ROM. Also, Stock Android UI makes it more stable. If you are Redmi Note 5 Pro user you must try Lineage OS 14.1 ROM. It is based on the Android Open Source Project with extra contributions from many people within the Android community. So today we share a guide to install Android 7.1.2 LineageOS 14.1 ROM for Redmi Note 5 Pro.

Lineage OS 14.1 is the best custom ROM for performance, battery backup, and gaming. LineageOS is perfect for daily usage, very smooth and optimized. Also, this custom ROM supports theme manager, Audio FX that give you to change equalizer setting. If you don’t like to use MiUI or you face lag then you must try LineageOS 14.1 ROM For Redmi Note 5 Pro. This ROM designed for performance also everything works perfectly. LineageOS 14.1 comes with preinstalled Gapps, so more easy to install this on your device.

ScreenShot

LineageOS 14.1 ROM For Redmi Note 5 Pro 1 - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro LineageOS 14.1 ROM For Redmi Note 5 Pro 6 - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro LineageOS 14.1 ROM For Redmi Note 5 Pro 7 - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro LineageOS 14.1 ROM For Redmi Note 5 Pro 8 - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro LineageOS 14.1 ROM For Redmi Note 5 Pro 9 - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro LineageOS 14.1 ROM For Redmi Note 5 Pro 10 - Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro

Special thanks to XDA Senior Member ” vasishath ” to build LineageOS 14.1 ROM For Redmi Note 5 Pro. Lineage OS can installed via Custom Recovery like TWRP, so you need to install TWRP recovery on Lineage OS 14.1. If you already installed recovery then let’s begin with the tutorial. Install Android 7.1.2 LineageOS 14.1 on Redmi Note 5 Pro Custom Rom and enjoy the experience of nougat with more performance and extra android features.

You may also like:

What’s working :

  • Boots
  • Volte
  • RIL (Calls, SMS, Data)
  • Fingerprint
  • Wi-Fi
  • Bluetooth
  • Camera
  • Camcorder
  • Video Playback
  • Audio
  • Sensors
  • Flash
  • LED
  • GPS

Requirements:-

  • First, take a complete backup of your device.
  • Make sure your device rooted and installed TWRP recovery.
  • Need 60-70% charge for flashing on your device.
  • Download Lineage OS 14.1 ROM, Gapps, Magisk from below.
  • Read the instructions carefully.

Custom ROM, Gapps, Magisk link:

If you like stock android UI then this is best custom ROM for you. LineageOS is one of the best custom ROM, download it and install on your Xiaomi Redmi Note 5 Pro. you can root the device after instaling the rom with this tutorial

LineageOS 14.1 For Redmi Note 5 Pro: lineage-14.1-UNOFFICIAL-whyred.zip

Gapps: opengapps

Guide To Install:-

  • Download “ lineage-14.1-UNOFFICIAL-whyred.zip ” copy it to external memory.
  • Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click Install.
  • Then navigate to the lineage-14.1-UNOFFICIAL-whyred.zip file, which you downloaded before.
  • Swipe to install the ROM.
  • When the process complete again back to a recovery menu and install Gapps and magisk file.
  • After the process ” reboot ” your device.
  • The first-time Reboot will take 4-5 minutes to boot, don’t interrupt the process.

 

If you have any problem comment below in the comment box, also, you can reach us at our official Facebook page.

The post Install Android 7.1.2 LineageOS 14.1 ROM For Redmi Note 5 Pro appeared first on GizRom.

]]>
https://www.gizrom.com/lineageos-14-1-rom-for-redmi-note-5-pro/feed/ 1
Download Oukitel K10 Stock Firmware, Tool, Driver https://www.gizrom.com/oukitel-k10-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=oukitel-k10-stock-firmware https://www.gizrom.com/oukitel-k10-stock-firmware/#comments Thu, 22 Mar 2018 06:53:17 +0000 https://www.gizrom.com/?p=13284 Oukitel K10 Stock Firmware, Tool, Driver

Download Oukitel K10 Stock Firmware, SP Flash Tool and MTK Driver For Unbrick Oukitel K10 Android phone and back to Android 7.1.1 nougat Stock UI.

The post Download Oukitel K10 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
Oukitel K10 Stock Firmware, Tool, Driver

The official Oukitel K10 Stock Firmware is here with driver tool and guide. OukitelK10 is now available on the market and many mods, custom ROM and TWRP are already available. That’s why always keep Oukitel K10 firmware to repair. You can also update Oukitel K10 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Oukitel K10.

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the stock firmware of Oukitel K10. By installing this Oukitel K10 stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Oukitel K10. Stock firmware doesn’t void the warranty of your device. The Oukitel K10 Firmware is now available for all regions. So let’s go the instruction to download Oukitel K10 Firmware.

Oukitel K10 Stock Firmware

Oukitel_K10 specification: The previous year, Oukitel released K10 with Android 7.1 (Nougat). This device runs on 2.0GHz quad-core MediaTek MT6763 processor and it comes with 6GB of RAM. K10 comes with 6.0 Inch touchscreen display of 1080 x 2160 pixels. It has 64 GB of internal storage.

The OukitelK10 gives you dual 21 + 8-megapixel rear camera to capture a good quality image and dual 13 + 8 megapixel in front facing the camera for selfies. It has Non-removable Li-Po 11000 mAh battery. The sensors in this device are a Gyroscope & Geomagnetic Sensor, Gravity Sensor, Proximity Sensor, Ambient Light Sensor, Fingerprint.

You May Also Like:

Firmware Details:

  • Android Version: Android 7.1.1
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 07.02.2018
  • Device name: Oukitel K10
  • Country: All.
  • Status: Official
  • File Size: 1.72 GB

Download Oukitel K10 Stock Firmware

We have uploaded latest firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site. This firmware helps you to many software issues and also unbrick Oukitel K10.

Firmware ⇒ OUKITEL_K10_V12_20180112.zip

Guide To Install Firmware:

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Oukitel K10 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/oukitel-k10-stock-firmware/feed/ 5
Download Karbonn Titanium Frames S7 Stock Firmware, Tool, Driver https://www.gizrom.com/karbonn-titanium-frames-s7-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=karbonn-titanium-frames-s7-stock-firmware https://www.gizrom.com/karbonn-titanium-frames-s7-stock-firmware/#respond Wed, 21 Mar 2018 21:29:59 +0000 https://www.gizrom.com/?p=13276 Karbonn Titanium Frames S7 Stock Firmware

Download Karbonn Titanium Frames S7 Stock Firmware, SP Flash Tool and MTK Driver For Unbrick Karbonn Titanium Frames S7 Android phone and back to Android 7.0 nougat Stock UI.

The post Download Karbonn Titanium Frames S7 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
Karbonn Titanium Frames S7 Stock Firmware

The official Karbonn Titanium Frames S7 Stock Firmware is here with driver tool and guide. Karbonn Titanium Frames S7is now available on market and lots of mods, custom ROM and TWRP are already available. That’s why always keep Karbonn Titanium Frames S7 firmware to repair. You can also update Titanium Frames S7 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Karbonn Titanium Frames S7.

Karbonn Titanium Frames S7 specification: The previous year, Karbonn released Titanium Frames S7 with Android 7.0 (Nougat). This device runs on 1.45GHz quad-core MediaTek MT6737T processor and it comes with 3GB of RAM. Titanium Frames S7 comes with 5.50 Inch touchscreen display of 1080×1920 pixels. It has 32 GB of internal storage.

The Karbonn Titanium Frames S7 gives you dual 13-megapixel rear camera to capture a good quality image and 13-megapixel in front facing the camera for selfies. It has Non-removable Li-Po 3000 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

Install Karbonn Titanium Frames S7 Stock Firmware

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the stock firmware of Karbonn Titanium Frames S7. By installing this Karbonn Titanium Frames S7 stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Karbonn Titanium Frames S7. Stock firmware doesn’t void the warranty of your device. The Karbonn Titanium Frames S7 Firmware is now available for all regions. So let’s go the instruction to download Karbonn Titanium Frames S7 Firmware.

You May Also Like:

Firmware Details:

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 20.10.2017
  • Device name: Karbonn Titanium Frames S7
  • Country: All.
  • Status: Official
  • File Size: 1.44 GB

Download Karbonn Titanium Frames S7 Firmware

We have uploaded latest firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site. This firmware helps you to many software issues and also unbrick Karbonn Titanium Frames S7.

Firmware ⇒ Karbonn_Titanium_Frames_S7_MT6737T_V12_7.0.zip

Guide To Install Firmware:

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Karbonn Titanium Frames S7 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/karbonn-titanium-frames-s7-stock-firmware/feed/ 0
Install February 2018 Galaxy S6 Edge Plus Firmware (G928PVPS3DRB1) https://www.gizrom.com/february-2018-galaxy-s6-edge-plus-firmware-g928pvps3drb1/?utm_source=rss&utm_medium=rss&utm_campaign=february-2018-galaxy-s6-edge-plus-firmware-g928pvps3drb1 https://www.gizrom.com/february-2018-galaxy-s6-edge-plus-firmware-g928pvps3drb1/#respond Tue, 20 Mar 2018 08:28:10 +0000 https://www.gizrom.com/?p=13221 Install G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware - Install February 2018 Galaxy S6 Edge Plus Firmware (G928PVPS3DRB1)

Download And Install G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware. This firmware brings latest march 2018 security patch. it supports on Samsung Galaxy S6 Edge Plus SM-G928P Sprint variant.

The post Install February 2018 Galaxy S6 Edge Plus Firmware (G928PVPS3DRB1) appeared first on GizRom.

]]>
Install G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware - Install February 2018 Galaxy S6 Edge Plus Firmware (G928PVPS3DRB1)

Install February 2018 Galaxy S6 Edge Plus Firmware (G928PVPS3DRB1)Install G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware

The G928PVPS3DRB1 update is ready for Samsung Galaxy S6 Edge Plus. We always share Samsung firmware fully unlocked links for full speed download. Officially Samsung launched the latest Android 7.0 nougat February 2018 update for Galaxy S6 Edge Plus. If you don’t update your device to latest security patch then you are the right place. Install this latest G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware and enjoy.

Latest Samsung Galaxy S6 Edge Plus Firmware is now available for download. The update is an official latest stable build and based on nougat. If you want to install latest stock firmware on Galaxy S6 Edge Plus then you are in right place here we provide you the Official latest Galaxy S6 Edge Plus stock firmware for SM-G928P models. Download and install G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware from below.

Samsung Galaxy S6 Edge Plus is old popular device so a lot of mods, custom ROM and TWRP are available. That’s why always keep Galaxy S6 Edge Plus Firmware to repair. You can also update Galaxy S6 Edge Plus smartphone and revert back to stock firmware, also If your device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Galaxy S6 Edge Plus.

The ROM is currently rolling out in USA sprint variant. It will soon come to other countries in a few days. This update comes with latest February [01.02.2018] security patch update. We share the direct download link of G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus. This firmware only for SM-G928P version device. Samsung Galaxy S6 Edge Plus firmware flashable with ODIN software. So let’s follow the instructions to download and Install G928PVPS3DRB1 February 2018 Galaxy S6 Edge Plus Firmware.

Galaxy S6 Edge Plus stock firmware Details:-

  • Android Version: Android 7.0 Nougat
  • UI Version: TouchWiz UI
  • Firmware Versions: G960FXXU1ARC5
  • Device name: Galaxy S6 Edge Plus
  • Model number: SM-G928P
  • PDA: G928PVPS3DRB1
  • CSC: G928PSPT3DRB1
  • Product code: SPR
  • Android security patch level: 01.02.2018
  • Status: Official (Full firmware)

Requirements:

  • Enable USB Debugging.
  • TURN OFF the Reactivation Lock – Go to Settings > Personal > Lock screen and Security > Find My Mobile and log in your Samsung Account. Then uncheck the turn Reactivation lock on.
  • Install Samsung Driver.
  • Download the ODIN file.
  • Read Instructions carefully.

Note: If your device bricked then don’t need to follow first 2 steps.

Firmware Tool, Driver link:

We share the direct download link of G928PVPS3DRB1 February 2018 update for Galaxy S6 Edge Plus. This firmware for Galaxy S6 Edge Plus SM-G928P version device. You can install it via Samsung Odin tool. Download Galaxy S6 Edge Plus stock firmware and let’s go to the instruction below.

Firmware⇒ SPR-G928PVPS3DRB1-20180227145650.zip

Guide To Install:-

  • First, extract Odin.zip and DBT_G960FXXU1ARC5_080318.zip via 7zip.
  • Then switch off your phone.
  • Next turn to download mode by pressing and holding Bixby button + Volume down + power.
  • After open Odin.exe into the extracted folder.
  • Then connect your phone to PC.
  • Odin will automatically detect your device
  • Then click the AP Box, and choose the” .tar ” file.
  • Check Auto Reboot and F.Reset Time options.
  • See the Screenshot >

  • Then click Start button to start the installation process.
  • After the process completes Finally, reboot your device and enjoy.

Note: The first time it takes 5-10 Minutes to boot your device.

You may also like:
If you want more this type of content then please like our social pages and regularly follow our blog.

The post Install February 2018 Galaxy S6 Edge Plus Firmware (G928PVPS3DRB1) appeared first on GizRom.

]]>
https://www.gizrom.com/february-2018-galaxy-s6-edge-plus-firmware-g928pvps3drb1/feed/ 0
Download Elephone S8 Stock Firmware, Tool, Driver https://www.gizrom.com/elephone-s8-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=elephone-s8-stock-firmware https://www.gizrom.com/elephone-s8-stock-firmware/#respond Mon, 19 Mar 2018 20:31:19 +0000 https://www.gizrom.com/?p=13215 Elephone S8 Stock Firmware

Download Elephone S8 Stock Firmware, SP Flash Tool and MTK Driver For Unbrick fix dead Elephone S8 Android phone and back to Android 7.1.1 Stock UI.

The post Download Elephone S8 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
Elephone S8 Stock Firmware

The official Elephone S8 Firmware is here with driver tool and guide. Elephone S8 is now available on market and lots of mods, custom ROM and TWRP are already available. That’s why always keep Elephone S8 stock firmware to repair. You can also update Elephone S8 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Elephone S8.

The previous year, Elephone released ElephoneS8 with Android 7.1.1 (Nougat). This device runs on 2.5GHz Deca Core Helio X25 ARM Mali T880 processor and it comes with 4GB of RAM. Elephone_S8 comes with 6.0 Inch Ultra narrow Sharp touchscreen of 2560 x 1440 pixels. It has 64 GB of internal storage.

The Elephone S8 gives you dual 21-megapixel rear camera with Auto Focus and flashlight to capture a good quality image and 8-megapixel in front facing the camera for selfies. It has Non-removable Li-Po 4000 mAh battery. The sensors in this device are a Fingerprint Sensor, Ambient Light Sensor, Gravity Sensor, Gyroscope, Hall Sensor, Proximity Sensor.

Install Elephone S8 Stock Firmware

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the stock firmware of Elephone S8. By installing this Elephone S8 stock firmware you can solve Screen freezing, boot loop other software related issues. Stock firmware doesn’t void the warranty of your ElephoneS8. The Elephone S8 Firmware is now available for all regions. So let’s go the instruction to download Elephone S8 Firmware.

Firmware Details:-

  • Android Version: Android 7.1.1
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 13.10.2017
  • Device name: Elephone S8
  • Country: All.
  • Status: Official
  • File Size: 1.36 GB

Download Elephone S8 Firmware

We have uploaded latest firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site.

Firmware ⇒ Elephone_S8_20171018.zip

Guide To Install Firmware:-

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.
You May Also Like:

If you want complete flashing method with video guide then visit this link ⇒ Here

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Elephone S8 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/elephone-s8-stock-firmware/feed/ 0
Install 5.8.5 Resurrection Remix Nougat ROM for Redmi 5A https://www.gizrom.com/nougat-rom-for-redmi-5a-riva/?utm_source=rss&utm_medium=rss&utm_campaign=nougat-rom-for-redmi-5a-riva https://www.gizrom.com/nougat-rom-for-redmi-5a-riva/#respond Sat, 17 Mar 2018 13:40:03 +0000 https://www.gizrom.com/?p=13167 RR 5.8.5 Nougat ROM For Redmi 5A RIVA

Install 5.8.5 Resurrection Remix Nougat ROM for Redmi 5A (RIVA). This ROM is almost fully stable but availabl with the features of Resurrection Remix 5.8 Nougat ROM.

The post Install 5.8.5 Resurrection Remix Nougat ROM for Redmi 5A appeared first on GizRom.

]]>
RR 5.8.5 Nougat ROM For Redmi 5A RIVA

Resurrection Remix 5.8.5 Nougat ROM for Redmi 5A5.8.5 Resurrection Remix Nougat ROM for Redmi 5A

Redmi 5A got the Android 7.0 Nougat update officially. Redmi 5A launched with MIUI 9 Nougat version, but many users want to update the device to the new Android 7.0 Custom ROMs Like RR, then you can try Resurrection Remix Nougat ROM For Redmi 5A. So today we share Stable Resurrection Remix 5.8 Nougat ROM For Redmi 5A. This custom ROM is fully stable and based on the latest Android 7.0 Nougat with the most recent security patch.

Xiaomi Redmi Note 5A packs octa-core Qualcomm Snapdragon 625 processor and will come with 2GB of RAM. This device has 5.5 inches HD capacitive touchscreen. The display resolution of 720x 1280pixels. This device has Dual 13megapixel rear with LED flash camera for taking good-quality photos and 5-megapixel front camera for a perfect selfie. It has Non-removable Li-Ion 3000 mAh battery. This will be another budget device from Xiaomi which will have an impact on budget range smartphones.

RR based on Android OS with a fully optimized kernel and light UI to get maximum performance. So RR is one of the best custom Android 7.0 Stable RR Nougat ROM For Redmi 5A Riva. Thanks to XDA members ” MuraliVijay ” to share this ROM.

Features of Resurrection Remix Nougat ROM:-

  • Simple RR.
  • Super Smooth.
  • Dialer fixed
  • VOLTE Working
  • Camera Works

you can call this as a stable custom ROM for Redmi 5A RIVA. So you can use this ROM as your daily driver.

Recommended For You:

Pre-requisites:-

  • Required Custom Recovery.
  • Backup Your Current ROM & all-important Data.
  • Need your device at least to 60% charge, as the process may take a while.
  • Download Resurrection_Remix.zip, Gapps file.
  • Read Instruction.

RR Nougat ROM For Redmi 5A RIVA Link:

Guide To Install:-

  • Download and copy all files to external or internal memory.
  • Turn off your phone and enter recovery mode by Volume Down + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click install.
  • Then navigate to the Rom.zip file, which you downloaded before.
  • Select the Resurrection_remix.zip file from the list to flash it.
  • Swipe for flashing.
  • Wait for processing complete.
  • Again back to recovery menu and install GAPPS file.
  • Reboot your device & enjoy.
  • It takes 5-10 minutes to boot, please don’t interrupt the process.
If you face any problems then comment below, we will be happy to help you !!!

The post Install 5.8.5 Resurrection Remix Nougat ROM for Redmi 5A appeared first on GizRom.

]]>
https://www.gizrom.com/nougat-rom-for-redmi-5a-riva/feed/ 0
Download Micromax Spark 4G 2017 Q409 Firmware, Tool, Driver https://www.gizrom.com/micromax-spark-4g-2017-q409-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=micromax-spark-4g-2017-q409-firmware https://www.gizrom.com/micromax-spark-4g-2017-q409-firmware/#respond Wed, 07 Mar 2018 11:45:47 +0000 https://www.gizrom.com/?p=13050 Micromax Spark 4G 2017 Q409 Firmware

Download Micromax Spark 4G 2017 Q409 Firmware, SP Flash Tool and MTK Driver For Unbrick fix dead Micromax Q409 Android phone and back to Android 7.0 Stock UI.

The post Download Micromax Spark 4G 2017 Q409 Firmware, Tool, Driver appeared first on GizRom.

]]>
Micromax Spark 4G 2017 Q409 Firmware

The official Micromax Spark 4G 2017 Q409 Firmware is here with driver tool and guide. Micromax Q409 Spark 4G 2017 is now available on market and lots of mods, custom ROM and TWRP are already available. That’s why always keep Micromax Spark 4G 2017 Q409 stock Firmware to repair. You can also update Micromax Q409 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Micromax Spark 4G 2017 Q409.

The previous year, Micromax released Micromax Q409 with Android 7.0 (Nougat). This device runs on 1.0 GHz Quad Core MediaTek MT6735M processor and it comes with 1GB of RAM. Micromax Q409 comes with 5.0 inches IPS LCD capacitive touchscreen of 720 x 1280 pixels. It has 16 GB of internal storage. The storage can be expandable up to 32 GB.

The Micromax Spark 4G 2017 Q409 gives you 8-megapixel rear camera to capture an average quality image and 5-megapixel in front facing the camera for selfies. It has Non-removable Li-Po 4000 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor.

Micromax Spark 4G 2017 Q409 Stock Firmware

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the stock firmware of Micromax Q409. By installing this Micromax Q409 stock firmware you can solve Screen freezing, boot loop other software related issues. Stock firmware doesn’t void the warranty of your Micromax Spark 4G 2017. The Micromax Q409 Firmware is now available for all regions. So let’s go the instruction to download Micromax Spark 4G 2017 Q409 Firmware.

Firmware Details:

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 02.03.2017
  • Device name: Micromax Spark 4G 2017
  • Model number: Q409
  • Country: All.
  • Status: Official
  • File Size: 1.21 GB

Download Micromax Spark 4G 2017 Q409 Firmware

We have uploaded latest firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site. 

Firmware ⇒ MMX_Q409_MT6735M_SW_V1.5.0_20072017.zip

Guide To Install Firmware:

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.
You May Also Like:

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Micromax Spark 4G 2017 Q409 Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/micromax-spark-4g-2017-q409-firmware/feed/ 0
Install Dot OS Android 7.1.2 Nougat ROM On Moto C https://www.gizrom.com/dot-os-android-7-1-2-nougat-rom-moto-c/?utm_source=rss&utm_medium=rss&utm_campaign=dot-os-android-7-1-2-nougat-rom-moto-c https://www.gizrom.com/dot-os-android-7-1-2-nougat-rom-moto-c/#comments Mon, 05 Mar 2018 12:52:53 +0000 https://www.gizrom.com/?p=13011 Dot OS Android 7.1.2 Nougat ROM On Moto C - Install Dot OS Android 7.1.2 Nougat ROM On Moto C

Install Dot OS Android 7.1.2 Nougat ROM On Moto C, it is full features packed ROM. DroidOnTime is focused on performance and stability.

The post Install Dot OS Android 7.1.2 Nougat ROM On Moto C appeared first on GizRom.

]]>
Dot OS Android 7.1.2 Nougat ROM On Moto C - Install Dot OS Android 7.1.2 Nougat ROM On Moto C

Here is the official Dot OS Android 7.1.2 Nougat ROM On Moto C. Dot OS is based on Android 7.1.2 Nougat version. Dot OS full name is ” DroidOnTime ” OS. You can get much more performance and stability in this ROM. Also, Stock Android UI makes it faster. If you are Motorola Moto C user you must try this ROM it comes with Android 7.1.2 Nougat. Let’s check it out this ROM features.

Dot OS Android 7.1.2 Nougat ROM On Moto C

DroidOnTime is full features packed ROM. Dot OS is one of the best nougat custom ROM for Motorola Moto C. This custom ROM is perfect for daily usage, very smooth, stable and optimized. Also, Full OMS support in this ROM, so now you can customize whatever you want with substratum theme engine and other mod. This ROM is pretty stable for daily use, but if you find any bugs then comment below.

Install Dot OS Android 7.1.2 Nougat ROM On Moto C

Special thanks to XDA Recognized Contributor ” Mysteryagr ” to build Dot OS Android 7.1.2 Nougat ROM on Moto C. Dot OS can installed via Custom Recovery like TWRP, so you need to install TWRP recovery on your device. If you already installed recovery then let’s begin with the tutorial. Install Dot OS Android 7.1.2 Nougat ROM on Moto C and enjoy the experience of nougat with sweet stable performance.

Features of DroidOnTime ROM:

  • Stability and Performance
  • Lagfree with High-Performance Results
  • Clutterless UI
  • Perfect Interface for every User
  • Enhanced default apps
  • Redesigned settings and QS panel
  • Full OMS support
  • Colour Engine Support
You may also like:

Requirements:-

  • First, take a complete backup of your device.
  • Make sure your device rooted and installed TWRP recovery.
  • Need 60-70% charge for flashing on your device.
  • Download Dot (DroidOnTime) OS ROM: DOT-N-v1.2-20171219-namath-UNOFFICIAL.zip.
  • Gapps Link: opengapps.
  • Read the instructions carefully.

Guide To Install:-

  • Download “ DOT-N-v1.2-20171219-namath-UNOFFICIAL.zip ” copy it to external memory.
  • Turn off your phone and enter Recovery Mode by Volume UP + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click Install.
  • Then navigate and select to the DOT-N-v1.2-20171219-namath-UNOFFICIAL.zip file, which you downloaded before.
  • Now click on “add more zips” and select Gapps file.
  • Swipe to install the ROM and gapps both files.
  • When the process complete.
  • After the complete process ” reboot ” your device.
  • The first-time Reboot will take 4-5 minutes to boot, don’t interrupt the process.

If you have any problem comment below in the comment box, also, you can like our social pages for more extra smartphone stuff.

The post Install Dot OS Android 7.1.2 Nougat ROM On Moto C appeared first on GizRom.

]]>
https://www.gizrom.com/dot-os-android-7-1-2-nougat-rom-moto-c/feed/ 2
Install Android Nougat ViperOS Custom ROM for Redmi 5A https://www.gizrom.com/nougat-viperos-custom-rom-redmi-5a/?utm_source=rss&utm_medium=rss&utm_campaign=nougat-viperos-custom-rom-redmi-5a https://www.gizrom.com/nougat-viperos-custom-rom-redmi-5a/#respond Fri, 02 Mar 2018 11:22:19 +0000 https://www.gizrom.com/?p=12985 Android Nougat ViperOS Custom ROM for Redmi 5A - Install Android Nougat ViperOS Custom ROM for Redmi 5A

Install Android Nougat ViperOS Custom ROM for Redmi 5A, this custom ROM supports many varieties of themes, VoLTE, Battery icon settings and much more. It is perfect for daily usage, very smooth and optimized.

The post Install Android Nougat ViperOS Custom ROM for Redmi 5A appeared first on GizRom.

]]>
Android Nougat ViperOS Custom ROM for Redmi 5A - Install Android Nougat ViperOS Custom ROM for Redmi 5A

Here is the Unofficial ViperOS Custom ROM for Redmi 5A. ViperOS 14.1 is based on Android 7.1.2 Nougat version. You can get much more performance and optimization in this ROM. Also, Stock Android UI makes it more smooth. If you are Xiaomi Redmi 5A user you must try this ROM it is faster and features packed ROM. Let’s check it out this ROM features.

Android Nougat ViperOS Custom ROM for Redmi 5A

ViperOS is one of the best custom ROM for performance, theme, and gaming. ViperOS is perfect for daily usage, very smooth and optimized. Also, this custom ROM supports many varieties of themes, VoLTE, Battery icon settings and much more. This ROM is stable but if you find any bugs then comment below. Probably it can be fixed in next software update.

Install Android Nougat ViperOS Custom ROM for Redmi 5A

Special thanks to XDA Member ” ataberkozen ” to build ViperOS Custom ROM for Redmi 5A. ViperOS can installed via Custom Recovery like TWRP, so you need to install TWRP recovery on your device. If you already installed recovery then let’s begin with the tutorial. Install Android 7.1.2 Nougat ViperOS Custom ROM for Redmi 5A and enjoy the experience of nougat with stable performance.

Features:-

  • Battery icon settings
  • VoLTE icon
  • Option to Display Data Disabled indicator Icons
  • Lock screen weather
  • Unlock keystore with fingerprint
  • Custom ambient display settings
  • And much more.
You may also like:

Requirements:-

Guide To Install:-

  • Download “ Viper-riva-20180203-Coral-v3.1.1-UNOFFICIAL.zip ” copy it to external memory.
  • Turn off your phone and enter Recovery Mode by Volume UP + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click Install.
  • Then navigate to the Viper-riva-20180203-Coral-v3.1.1-UNOFFICIAL.zip file, which you downloaded before.
  • Now click on ” Add more zips ” and select Gapps file.
  • Swipe to install the ROM.
  • When the process complete.
  • After the complete process ” reboot ” your device.
  • The first-time Reboot will take 4-5 minutes to boot, don’t interrupt the process.

If you face any problem comment below in the comment box. Also, you can reach us on our social pages.

The post Install Android Nougat ViperOS Custom ROM for Redmi 5A appeared first on GizRom.

]]>
https://www.gizrom.com/nougat-viperos-custom-rom-redmi-5a/feed/ 0
Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus https://www.gizrom.com/android-7-1-2-lineage-os-14-1-rom-lg-stylo-3-plus/?utm_source=rss&utm_medium=rss&utm_campaign=android-7-1-2-lineage-os-14-1-rom-lg-stylo-3-plus https://www.gizrom.com/android-7-1-2-lineage-os-14-1-rom-lg-stylo-3-plus/#comments Fri, 02 Mar 2018 07:58:37 +0000 https://www.gizrom.com/?p=12978 Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus - Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus

Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus, Lineage OS 14.1 is the best custom ROM for performance, battery backup, and gaming. LineageOS is perfect for daily usage, very smooth and optimized.

The post Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus appeared first on GizRom.

]]>
Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus - Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus

Here is the most popular Lineage OS 14.1 ROM for LG Stylo 3 Plus. Lineage OS 14.1 is based on Android 7.1.2 Nougat version. You can get much more performance and stability in this ROM. Also, Stock Android UI makes it more stable. If you are LG Stylo 3 Plus user you must try this ROM it is fast and features packed ROM. Let’s check it out this custom ROM features.

Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus

Lineage OS 14.1 is the best custom ROM for performance, battery backup, and gaming. LineageOS is perfect for daily usage, very smooth and optimized. Also, this custom ROM supports theme manager, Audio FX that give you to change equalizer setting. This ROM is on the earlier build, some of the bugs in this ROM. Probably it will fix in next software update.

Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus

Special thanks to XDA Senior Member ” messi2050 ” to build Lineage OS 14.1 ROM for LG Stylo 3 Plus. Lineage OS can installed via Custom Recovery like TWRP, so you need to install TWRP recovery on Lineage OS 14.1. If you already installed recovery then let’s begin with the tutorial. Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus Custom Rom and enjoy the experience of nougat with stable performance.

Bugs:

  • NFC
  • Vo-LTE

Note: You need to reset the APN manually for data connection.

You may also like:

Requirements:-

  • First, take a complete backup of your device.
  • Make sure your device rooted and installed TWRP recovery.
  • Need 60-70% charge for flashing on your device.
  • Download Lineage OS 14.1 ROM: lineage_sf340n-#6.zip.
  • Read the instructions carefully.

Guide To Install:-

  • Download “ lineage_sf340n-#6.zip ” copy it to external memory.
  • Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click Install.
  • Then navigate to the lineage_sf340n-#6.zip file, which you downloaded before.
  • Swipe to install the ROM.
  • When the process complete.
  • After the complete process ” reboot ” your device.
  • The first-time Reboot will take 4-5 minutes to boot, don’t interrupt the process.

If you have any problem comment below in the comment box, also, you can reach us at our official Facebook page GIZROM.

The post Install Android 7.1.2 Lineage OS 14.1 ROM for LG Stylo 3 Plus appeared first on GizRom.

]]>
https://www.gizrom.com/android-7-1-2-lineage-os-14-1-rom-lg-stylo-3-plus/feed/ 4
Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6 https://www.gizrom.com/nougat-nokia-custom-rom-on-doogee-y6/?utm_source=rss&utm_medium=rss&utm_campaign=nougat-nokia-custom-rom-on-doogee-y6 https://www.gizrom.com/nougat-nokia-custom-rom-on-doogee-y6/#respond Thu, 01 Mar 2018 14:42:34 +0000 https://www.gizrom.com/?p=12963 Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6 - Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6

Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6, you can get full Nokia features with this custom ROM. This ROM based on AOSP with small adjustments by Nokia.

The post Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6 appeared first on GizRom.

]]>
Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6 - Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6

Previous year Nokia release their new Android smartphone with Nokia UI. Today we found Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6. This Nokia ROM ported from directly Nokia 3 device. It is Stable ROM no need to worry about it. You can use this ROM as the daily driver.

Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6

This custom ROM based on AOSP with small adjustments by Nokia. XDA Senior Member ” Nonta72 ” ported and share to install Nokia Custom ROM on DOOGEE Y6. All the features work as of yet and this ROM can be used as a daily use. Nokia ROM brings lots of features and it is Smooth and Faster than stock UI.

Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6

Many users don’t like the Android stock UI so if you try this ROM. It is almost same as AOSP but lite customize and include Nokia features. If you want to install this Nokia Custom ROM on DOOGEE Y6 then download and install. The best part of is you can get full Nokia features with this custom ROM. For install, Nokia ROM needs TWRP recovery and root in DOOGEE Y6. If you are new to the process, then properly follow the instructions below.

You may also like:

_ScreenShots_

Requirements:-

  • First, take a complete backup of your device.
  • Make sure your device rooted and installed TWRP recovery.
  • Need 60-70% charge for flashing on your device.
  • Download Nokia ROM: Nokia-ROM_Y6_by_Nonta72 .zip.
  • Read the instructions carefully.

Guide To Install:-

  • Download “ Nokia-ROM_Y6_by_Nonta72 .zip ” copy it to external memory.
  • Turn off your phone and enter Recovery Mode by Volume UP + Power Key at the same time.
  • Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
  • Back to recovery menu and click Install.
  • Then navigate to the Nokia-ROM_Y6_by_Nonta72 .zip file, which you downloaded before.
  • Swipe to install the ROM.
  • When the process complete.
  • After the complete process ” reboot ” your device.
  • The first-time Reboot will take 4-5 minutes to boot, don’t interrupt the process.

Your ROM is Ready now if you face any problem comment below.

The post Install Android 7.0 Nougat Nokia Custom ROM On DOOGEE Y6 appeared first on GizRom.

]]>
https://www.gizrom.com/nougat-nokia-custom-rom-on-doogee-y6/feed/ 0
Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver https://www.gizrom.com/micromax-selfie-2-note-q4601-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=micromax-selfie-2-note-q4601-firmware https://www.gizrom.com/micromax-selfie-2-note-q4601-firmware/#respond Sun, 25 Feb 2018 09:09:10 +0000 https://www.gizrom.com/?p=12923 Micromax Selfie 2 Note Q4601 Firmware Tool Driver - Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver

Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver, This is the Latest Nougat Stock Firmware for this device. It fixes various issues and unbrick your Micromax Q4601.

The post Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver appeared first on GizRom.

]]>
Micromax Selfie 2 Note Q4601 Firmware Tool Driver - Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver

We are sharing Micromax Selfie 2 Note Q4601 Firmware, Driver, and Tool in this post. Here we have shared the official Micromax Selfie 2 Note Q4601 Firmware for unbricking and updating. You can also update your Micromax Selfie 2 Note smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom Rom’s Kernels or anything customized this firmware will Unbrick Micromax Selfie 2 Note Q4601.

Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver

The previous year, Micromax released Micromax Selfie 2 Note with Android 7.0 (Nougat). This device runs on Quad-core 1.3 GHz MediaTek MT6737 processor and it comes with 3GB of RAM. Micromax Selfie 2 Note comes with 5.5 inches IPS LCD capacitive touchscreen of 720 x 1280 pixels. It has 32 GB of internal storage. The storage can be expandable up to 32 GB.

The Micromax Selfie 2 Note gives you 13-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for selfies. It has Non-removable Li-Ion 3000 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope, fingerprint.

If you facing any lag of your device, network issue, and any software related problem then follow the guide and install this stock firmware. This stock firmware fixes any issue and unbrick Selfie 2 Note Q4601. Stock firmware doesn’t void the warranty of your Micromax Selfie 2 Note Q4601. So let’s go to the instruction to download Micromax Selfie 2 Note Firmware.

Micromax Selfie 2 Note Q4601 Firmware Details:-

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 20.06.2017
  • Device name: Micromax Selfie 2 Note
  • Model number: Q4601
  • Country: All.
  • Status: Official
  • File Size: 1.5 GB
  • Firmware link: Micromax_Q4601_MT6737M_SW_V7_HW_V1.0_06202017.zip

Guide To Install Firmware:-

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.
You May Also Like:

If you want complete flashing method with video guide then visit this link ⇒ Here

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/micromax-selfie-2-note-q4601-firmware/feed/ 0
Download Micromax Selfie 2 Q4311 Firmware, Tool, Driver https://www.gizrom.com/micromax-selfie-2-q4311-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=micromax-selfie-2-q4311-firmware https://www.gizrom.com/micromax-selfie-2-q4311-firmware/#respond Sat, 24 Feb 2018 13:26:00 +0000 https://www.gizrom.com/?p=12910 Micromax Selfie 2 Q4311 Firmware Tool Driver - Download Micromax Selfie 2 Q4311 Firmware, Tool, Driver

Download Micromax Selfie 2 Q4311 Firmware, Tool, Driver, This is the Latest Nougat Stock Firmware for this device. It fixes various issues and unbrick your Micromax Q4311.

The post Download Micromax Selfie 2 Q4311 Firmware, Tool, Driver appeared first on GizRom.

]]>
Micromax Selfie 2 Q4311 Firmware Tool Driver - Download Micromax Selfie 2 Q4311 Firmware, Tool, Driver

We are sharing Micromax Selfie 2 Q4311 Firmware, Driver, and Tool in this post. Here we have shared the official Micromax Selfie 2 Q4311 Firmware for unbricking and updating. You can also update your Micromax Selfie 2 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom Rom’s Kernels or anything customized this firmware will Unbrick Micromax Selfie 2 Q4311.

Micromax Selfie 2 Q4311 Firmware ,Tool, Driver

The previous year, Micromax released Micromax Selfie 2 with Android 7.0 (Nougat). This device runs on Quad-core 1.3 GHz MediaTek MT6737 processor and it comes with 3GB of RAM. Micromax Selfie 2 comes with 5.2 inches Capacitive touchscreen of 720 x 1280 pixels. It has 32 GB of internal storage. The storage can be expandable up to 32 GB.

The Micromax Selfie 2 gives you 13-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for selfies. It has removable Li-Ion 3000 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope, fingerprint.

If you face any lag of your device and network issue then follow the guide and install this stock firmware. This stock firmware fixes any issue and unbrick Selfie 2 Q4311. Stock firmware doesn’t void the warranty of your Micromax Selfie 2 Q4311. So let’s go to the instruction to download Micromax Selfie 2 Firmware.

Micromax Selfie 2 Q4311 Firmware Details:-

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 28.10.2017
  • Device name: Micromax Selfie 2
  • Model number: Q4311
  • Country: All.
  • Status: Official
  • File Size: 1.4 GB
  • Firmware link: MMX_Q4311_SW_V19_HW_V1.0_10282017.zip

Guide To Install Firmware:-

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.
You May Also Like:

If you want complete flashing method with video guide then visit this link ⇒ Here

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

The post Download Micromax Selfie 2 Q4311 Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/micromax-selfie-2-q4311-firmware/feed/ 0
N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U https://www.gizrom.com/n950usqu3bra6-january-2018-patch-galaxy-note-8-sm-n950u/?utm_source=rss&utm_medium=rss&utm_campaign=n950usqu3bra6-january-2018-patch-galaxy-note-8-sm-n950u https://www.gizrom.com/n950usqu3bra6-january-2018-patch-galaxy-note-8-sm-n950u/#respond Fri, 16 Feb 2018 18:16:25 +0000 https://www.gizrom.com/?p=12858 N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM N950U - N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U

N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U, This update brings some new item and latest January [01.01.2018] security patch update with other some new features.

The post N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U appeared first on GizRom.

]]>
N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM N950U - N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U

The N950USQU3BRA6 update is ready for Samsung Galaxy Note 8 SM-N950U T-Mobile variant. Previously we already posted the N950USQS2BQL9 firmware for Galaxy Note 8 Sprint variant. Now we always upload latest security patch also upload the N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U. Officially Samsung launched the latest N950USQU3BRA6 Galaxy Note 8 SM-N950U Nougat Firmware with latest January 2018 Security Patch.

N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U

Samsung released Galaxy Note 8 Sprint smartphone with Android v7.1.1 (Nougat). Galaxy Note 8 devices run 1.6GHz octa-core Qualcomm Snapdragon 835 processor and it comes with 6GB of RAM. Galaxy Note 8 has 6.3 inches Super AMOLED capacitive touchscreen with a resolution of 1440 x 2560 pixels display. This device has Dual 12-megapixel rare camera for photo and 8-megapixel front camera for the selfie.

This update brings some new item and latest January [01.01.2018] security patch update with other some new features. We created the direct download link of N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U. This firmware only for Galaxy S8 SM-N950U (T-Mobile) version device. You can install via Samsung Odin tool or Samsung Kies we will guide you how to install via Odin.

Firmware Details:-

  • Android Version: Android 7.1.1 Nougat
  • UI Version: Samsung experience UI
  • Firmware Versions: N950USQU3BRA6
  • Device name: Galaxy Note 8
  • Model number: SM-N950U
  • Release Date: 02.02.2018
  • Android security patch level: 01.01.2018
  • Country: USA (T-Mobile)
  • PDA: N950USQU3BRA9
  • CSC: N950UOYN3BRA9
  • File size: 3.46 GB

Prerequisites:-

  • Make sure your device model no is SM-N950U.
  • Enable USB Debugging.
  • TURN OFF the Reactivation Lock – Go to Settings > Personal > Lock screen and Security > Find My Mobile and log in your Samsung Account. Then uncheck the turn Reactivation lock on.
  • Install Samsung Driver ⇒ Here.
  • Download Odin and Firmware file from below.
  • Read Instructions carefully.

N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U

Guide To Install:-

  • First, extract Odin.zip and N950USQU3BRA6 firmware.zip via 7zip.
  • Then switch off your phone.
  • Next turn to download mode by pressing and holding Volume Down + Home + Power.
  • After open Odin.exe into the extracted folder.
  • Then connect your phone to PC.
  • Odin will automatically detect your device
  • Then click the AP Box, and choose the” .tar ” file.
  • Check Auto Reboot and F.Reset Time options.
  • See the Screenshot >

  • Then click Start button to start the installation process.
  • After the process completes Finally, reboot your device and enjoy.

Read full Odin flash guide from ⇒ Here.

Note: The first time it takes 5-10 Minutes to boot your device.

You may also like:

 

Please like our social pages for more firmware link and if you face any problem during flashing then comment below.

The post N950USQU3BRA6 January 2018 Patch For Galaxy Note 8 SM-N950U appeared first on GizRom.

]]>
https://www.gizrom.com/n950usqu3bra6-january-2018-patch-galaxy-note-8-sm-n950u/feed/ 0
Download Latest Micromax Canvas 1 Stock Firmware, Tool, Driver https://www.gizrom.com/latest-micromax-canvas-1-stock-firmware/?utm_source=rss&utm_medium=rss&utm_campaign=latest-micromax-canvas-1-stock-firmware https://www.gizrom.com/latest-micromax-canvas-1-stock-firmware/#comments Thu, 15 Feb 2018 12:54:30 +0000 https://www.gizrom.com/?p=12842 Latest Micromax Canvas 1 Stock Firmware Tool Driver - Download Latest Micromax Canvas 1 Stock Firmware, Tool, Driver

Download Latest Micromax Canvas 1 Stock Firmware, Tool, Driver, download to unbrick, update, and It fixes various types of issues of Canvas 1.

The post Download Latest Micromax Canvas 1 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
Latest Micromax Canvas 1 Stock Firmware Tool Driver - Download Latest Micromax Canvas 1 Stock Firmware, Tool, Driver

We are sharing latest Micromax Canvas 1 Stock Firmware, Driver, and Tool in this post. Here we have shared the official Micromax Canvas 1 Firmware for unbricking and updating. You can also update your Micromax Canvas 1 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom Rom’s Kernels or anything customized this firmware will Unbrick Micromax Canvas 1.

Latest Micromax Canvas 1 Stock Firmware, Tool, Driver

The previous year, Micromax released Micromax Canvas 1 with Android 7.0 (Nougat). This device runs on 1.3GHz quad-core MediaTek MT6737 processor and it comes with 2GB of RAM. Micromax Canvas 1 comes with 5.0 inches IPS LCD capacitive touchscreen of 720 x 1280 pixels. It has 16 GB of internal storage. The storage can be expandable up to 64 GB.

The Micromax Canvas 1 gives you 8-megapixel rear camera to capture a good image and 5-megapixels in front facing the camera for excellent selfies. It’s a Non-Removable Li-Ion 2500 mAh battery that keeps you charged for long. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

If you face any lag of your device and network issue then follow the guide and install this stock firmware. This stock firmware fixes any issue and unbrick Canvas 1. Stock firmware doesn’t void the warranty on your device. So let’s go to the instruction to download Micromax Canvas 1 Stock Firmware.

Micromax Canvas 1 Stock Firmware Details:-

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 23.06.2017
  • Model: Micromax Canvas 1
  • Country: All.
  • Status: Official
  • File Size: 1.6 GB
  • Firmware link: Micromax_C1_20170623.zip

Guide To Install Firmware:-

  • Download the zip file and Unzip it.
  • Install Driver from driver folder.
  • Install YGDP from “YGDP Tool v4.0.3” folder.
  • Now Open YGDP_assembly.exe from Desktop or “C:\Program Files (x86)”.
  • Enter password 9527 or 369 to login to this tool.
  • Click on config in YGDP tool.
  • Add “CPB” file from “Firmware” folder then click apply.
  • Switch off your Phone
  • Click on start in YGDP tool.
  • Switch off your device and connect to PC using the USB cable that’s it.
You May Also Like:

Note: The first time it takes 5-10 minutes to boot.

If face Any Problem Please Comment Below.

The post Download Latest Micromax Canvas 1 Stock Firmware, Tool, Driver appeared first on GizRom.

]]>
https://www.gizrom.com/latest-micromax-canvas-1-stock-firmware/feed/ 2