The official Cubot Note Plus Stock Firmware is here with driver tool and guide. Cubot Note Plus is now available on the market and after release TWRP and root method, you can install lots of mods, custom ROM and much more. To keep your device safe always save Cubot Note Plus firmware to repair. You can also update Cubot Note Plus smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Cubot Note Plus.
Download Cubot Note Plus Stock Firmware
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for Cubot Note Plus. By installing this stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Cubot Note Plus. Stock firmware doesn’t void the warranty of your device. The Cubot Note Plus Firmware is now available for all regions with play store. So let’s go the instruction to download the Firmware.
Cubot Note Plus Specification:
This year, Cubot released Cubot Note Plus with Android 7.0 (Nougat). This device runs on 1.5 GHz octa-core MediaTek MT6737T processor and it comes with 3 GB of RAM. This device comes with a 5.2 inches IPS LCD capacitive touchscreen with 1920 x 1080 pixels. It has 32 GB of internal storage.
This device brings the 16-Megapixel rear camera to capture good quality images and 16-Megapixels front-facing camera for the selfies. The device powered by Non-removable Li-Po 2800 mAh battery. It has a Light sensor, Distance sensor, Accelerometer.
Firmware Details:
- Android Version: Android 7.0
- Android Name: Nougat
- UI Version: Stock UI
- Device name: Cubot Note Plus
- Country: All.
- Status: Official
Download Cubot Note Plus Firmware
We have uploaded the latest Cubot Note Plus firmware, SP Flash Tool and MTK driver so you can download directly from our site. This firmware helps you to many software issues and also unbrick Cubot Note Plus.
[table id=35 /]
Guide To Install Firmware:
- Download Tool, Driver, Firmware
- Then extract firmware.zip, Tool, driver.
- Now install USB drivers.
- After that open the Smart Phone Flash tool (flash_tool.exe).
- Then click the Scatter-loading button and browse and select the extracted firmware [MT6737T_Android_scatter.txt] file which you have already downloaded.
- Now hit the download button.
- Switch off your phone and connect your phone to the PC by pressing vol down key.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
Note: The first time it takes 5-10 minutes to boot.