We share Gionee Pioneer P4S stock firmware and full tool and manual. Here we have upload KitKat firmware for Gionee_Pioneer P4S. You can also update your Gionee_Pioneer P4S smartphone and return to stock, also if you have a brick or boot loop device after installing custom ROM or anything custom mods.
Gionee released Gionee Pioneer P4S smartphone with stable android v4.4 (KitKat) amigo UI. The Gionee_Pioneer P4S is run 1.3ghz quad-core and it comes with 1GB of RAM. Internal storage is 8 GB that can be expanded up to 32 GB via a MicroSD. It has 4.5 inches capacitive touchscreen, 16M colors, with a resolution of 480 x 854 pixels. Gionee_pioneer p4s lets you snap brilliant 5-megapixel photos and 2-megapixel. It’s removable li-po 1800 mah battery. Sensors in the phone include a proximity sensor, ambient light sensor, accelerometer.
Gionee P4S Firmware Details:-
- Android Version:- KitKat v4.4
- UI Version:- Amigo
- Gionee P4S:- All.
- Release Date:- 10.Mar.2016
- Status:- “.Zip” file & Tool.
- File Size:- 935MB
⇓⇓ Download Gionee P4S Firmware From Below⇓⇓
Guide To Install Firmware:-
- Install USB Drivers.
- Extract Gionee_P4S_0201_T5482.zip file via WinZip or 7zip.
- Now open the SP Flash Tool and click the download tab button.
- Then click Scatter-Loading button and browse and select the extracted Gionee_P4S_0201_T5482.zip [scatter.txt] file from firmware folder.
- Now hit the download button.
- Switch off your phone and connect your phone to the pc.
- After the flashing, a green tick will appear.
- Disconnect your phone and make it on.
Note:- The first time it takes 5-10 minutes to boot.
If Any Problem Please Comment Below…..
IF YOU LIKE THIS POST SO PLEASE HIT THE SHARE BUTTON BELOW TO SHARE THIS ARTICLE ON FACEBOOK, TWITTER, AND GOOGLE FRIENDS….. :p :p :p