The official LeEco Le 2 Firmware is here with driver tool and guide. LeEco Le 2 is now available on the market and after release TWRP and root method, you can install lots of mods, custom ROM and much more. To keep your device safe always save LeEco Le 2 stock firmware to repair. You can also update LeEco Le 2 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick LeEco Le 2.
Download LeEco Le 2 Firmware
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for LeEco Le 2. By installing this stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick LeEco Le 2. Stock firmware doesn’t void the warranty of your device. The LeEco Le 2 Stock Firmware is now available for all regions with play store. So let’s go the instruction to download the Firmware.
LeEco Le 2 Specification:
This year, Elephone released LeEco Le 2 with Android 6.0 (Marshmallow). This device runs on 1.8GHz octa-core Snapdragon 652 processor and it comes with 3GB of RAM. This device comes with a 5.5 inches HD capacitive touchscreen with 1080 x 1920 pixels. It has 32/64 GB of internal storage.
This device brings 16-Megapixels rear camera to capture good quality images and 8-Megapixel front-facing camera for the selfies. The device powered by Non-removable Li-Po 3000 mAh battery. It has a Sensor: Fingerprint (rear-mounted), accelerometer, gyro, proximity, compass.
- Android Version: Android 6.0
- Android Name: Marshmallow
- UI Version: Stock UI
- Device name: LeEco Le 2
- Country: All.
- Status: Official
Download LeEco Le 2 Stock Firmware
We have uploaded the latest LeEco Le 2 firmware, QFIL Tool and Qualcomm driver so you can download directly from our site. This firmware helps you to many software issues and also unbrick LeEco Le 2.
|Model Name: LeEco Le 2||Download Links||File Size|
|Tool - QFIL Tool||Qualcomm_Flash_Image_Loader_v126.96.36.199.zip||3.52 MB|
|Driver - Qualcomm Driver||Qualcomm-Driver.zip||226.14 KB|
|Firmware -||Le2_X526_QFIL_IN_sparse.zip||1.56 GB|
Guide To Install Firmware:
- Download Tool, Driver, Firmware (zip file).
- Extract firmware.zip, Tool, driver.
- Install USB drivers.
- Now open the QFIL.exe.
- Then select Browse under the Programmer path and Load “.MBN” file from firmware folder.
- Now switch off the phone and Hold Volume up + Down + Power.
- Select port in QFIL tool.
- Now hit the download button and wait for flashing.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
If you are facing SIM 2 Issue then after flashing this firmware, install TWRP recovery in your device. Then Download ‘Update.zip‘ file from below and install using TWRP.
Note: The first time it takes 5-10 minutes to boot.