The official Lenovo Tab 4 10 Plus Firmware is here with driver tool and guide. If you are your bricked y device by installing custom ROM or other mods then you can recover your device by using this Firmware. The Lenovo Tab 4 10 Plus Firmware is now available for all regions with play store. We will guide you how to install Lenovo Tab 4 10 Plus stock firmware with Mtk flash tool.
Lenovo Tab 4 10 Plus Specification:
Lenovo released Lenovo Tab 4 10 Plus with Android 7.0 (Nougat). This device runs on Octa-core 2.0 GHz processor and it comes with 3/4GB of RAM. This device comes with 10.1 inches IPS LCD capacitive touchscreen with 1200 x 1920 pixels. It has 16/64 GB of internal storage.
This device brings the 8-megapixel rear camera to capture ultra quality images and 5-megapixel front-facing camera for the selfies. The device powered by Non-removable Li-Po 7000 mAh battery. It measures 247 x 173 x 7 mm (height x width x thickness). The device has a Fingerprint (front-mounted), accelerometer.
Lenovo Tab 4 10 Plus Stock Firmware
If you facing any lag of your device, network issue, and any software related problem then you can download the Stock ROM or stock firmware for Lenovo Tab 4 10 Plus. This stock firmware fixes any issue and unbrick Lenovo Tab 4 10 Plus. Stock firmware doesn’t void the warranty of your Android device. So let’s go to the instruction to download and install Lenovo Tab 4 10 Plus firmware.
- Android Version: Android 7.x
- Android Name: Nougat
- UI Version: Stock UI
- Device name: Lenovo Tab 4 10 Plus
- Country: All.
- Status: Official
Download Lenovo Tab 4 10 Plus Stock Firmware
We have uploaded the latest Lenovo Tab 4 10 Plus firmware, QFIL Tool and Qualcomm driver so you can download directly from our site. This firmware helps you to many software issues and also unbrick Lenovo Tab 4 10 Plus.
|Model Name: Lenovo Tab 4 10 Plus||Download Links||File Size|
|Tool - QFIL Tool||Qualcomm_Flash_Image_Loader_v184.108.40.206.zip||3.52 MB|
|Driver - Qualcomm Driver||Qualcomm-Driver.zip||226.14 KB|
|Firmware - (Android 7.x)||Tab_4_10_Plus_TB-X704N_S000038-170703.zip||1.34 GB|
Guide To Install Firmware:-
- Download Tool, Driver, Firmware (zip file).
- Extract firmware.zip, Tool, driver.
- Install USB drivers.
- Now open the QFIL.exe.
- Then select Browse under the Programmer path and Load “.MBN” file from firmware folder.
- Now switch off the phone and Hold Volume up + Down + Power.
- Select port in QFIL tool.
- Now hit the download button and wait for flashing.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
Note: The first time it takes 5-10 minutes to boot.