The official Xolo Q520s Stock Firmware is here with driver tool and guide. Xolo_Q520s is now available on market and maybe after some weeks or days, lots of mods, custom ROM and TWRP will available. That’s why always keep Xolo Q520s firmware to repair. You can also update Q520s smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Xolo Q520s.
Xolo Q520s Stock Firmware
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the stock firmware of Xolo Q520s. By installing this Xolo Q520s stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Xolo Q520s. Stock firmware doesn’t void the warranty of your device. The Xolo Q520s Firmware is now available for all regions. So let’s go the instruction to download Xolo Q520s Firmware.
Xolo_Q520s specification: The previous year, Xolo released Q520s with Android v4.4.2 (KitKat). This device runs on 1.3GHz quad-core MediaTek MT6582M processor and it comes with 512MB of RAM. It comes with 4.0 inches IPS LCD capacitive touchscreen display of 480 x 800 pixels. It has 4 GB of internal storage.
The Xolo_Q520s bring 5-megapixel rear camera to capture image and 0.3-megapixel in front facing the camera for selfies. It has Removable Li-Po 1820 mAh battery. The sensors in this device are a Proximity sensor, Ambient light sensor, Accelerometer, and Gyroscope.
- Android Version: KitKat v4.4.2
- Device: Xolo Q520s
- Model: All Model.
- Status: Official
- Release Date: 22.Apr.2016
- Status: Official
- Type: “.Zip” file.
- File Size: 647MB
Download Xolo Q520s Firmware
We have uploaded latest firmware, SP Flash tool and MTK driver in a single zip file so you can download directly from our site. This firmware helps you to many software issues and also unbrick Xolo Q520s.
Firmware ⇒ Xolo_Q520s_S007_MT6582_11112014.zip
Guide To Install Firmware:
- Extract Downloaded Zip File Via WinZip and; 7zip.
- Install USB Drivers.
- Now Open The SP Flash Tool & Click The Download Tab Button.
- Then Click Scatter-Loading Button & Browse And Select The Extracted Firmware Zip [scatter.txt] File Which You Have Already Downloaded.
- Now Hit The Download Button.
- Switch Off Your Phone & Connect Your Phone To The PC.
- After The Flashing A Green Tick Will Be Appear.
- Disconnect Your Phone And Make It On.
Note:- Frist Time Its Takes 5-10 Minutes To Boot.