Download Latest Lenovo Phab 2 Plus Firmware (PB2-670M)


The official Lenovo Phab 2 Plus Firmware is here with driver tool and guide. If you are a user of Lenovo Phab 2 Plus and bricked the device by installing custom ROM or other mods then you can recover your device by using this Firmware. We will guide you how to install Lenovo Phab 2 Plus Firmware PB2-670M_S000050_171016_ROW with Mtk flash tool.

1x1.trans - Download Latest Lenovo Phab 2 Plus Firmware (PB2-670M)

Lenovo released Lenovo Phab 2 Plus with Android 6.0 (Marshmallow). This device runs on Octa-core 1.3 GHz processor and it comes with 3GB of RAM. Lenovo Phab 2 Plus comes with 6.4 inches IPS LCD capacitive touchscreen of 1080 x 1920 pixels. It has 32 GB of internal storage. The storage can be expandable up to 64 GB.

The Lenovo Phab 2 Plus has 13-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for selfies. It has removable Li-Po 4050 mAh battery. The sensors in this device are an accelerometer, gyro, proximity, compass.

If you facing any lag of your device, network issue, and any software related problem then follow the guide and install this stock firmware. This stock firmware fixes any issue and unbricks Phab 2 Plus. Stock firmware doesn’t void the warranty of your Lenovo Phab 2 Plus. So let’s go to the instruction to download Lenovo Phab 2 Plus Firmware.

Lenovo Phab 2 Plus Firmware Firmware Details:-

  • Android Version: Android 6.0
  • Version Name: PB2-670M_S000050_171016_ROW
  • Android Name: Marshmallow
  • UI Version: Stock UI
  • Release Date: 16/10/17
  • Device name: Lenovo Phab 2 Plus
  • Model number: PB2-670M
  • Country: RU.
  • Status: Official
  • File Size: 1.2 GB

Firmware Tool, Driver link

We have uploaded latest firmware, Lenovo MTk flash tool and Lenovo MTk driver to you can download directly from our site. 

Also Read  Install B361 Huawei P8 Android 6.0 OTA [Middle East]

Firmware ⇒

Tool ⇒

Driver ⇒ Lenovo

Guide To Install Firmware:-

  • Download Tool, Driver, Firmware
  • Extract, Tool, driver.
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.
You May Also Like:-

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.


Leave A Reply

Your email address will not be published.