Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver

0 135

We are sharing Micromax Selfie 2 Note Q4601 Firmware, Driver, and Tool in this post. Here we have shared the official Micromax Selfie 2 Note Q4601 Firmware for unbricking and updating. You can also update your Micromax Selfie 2 Note smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom Rom’s Kernels or anything customized this firmware will Unbrick Micromax Selfie 2 Note Q4601.

Micromax Selfie 2 Note Q4601 Firmware Tool Driver - Download Micromax Selfie 2 Note Q4601 Firmware, Tool, Driver

The previous year, Micromax released Micromax Selfie 2 Note with Android 7.0 (Nougat). This device runs on Quad-core 1.3 GHz MediaTek MT6737 processor and it comes with 3GB of RAM. Micromax Selfie 2 Note comes with 5.5 inches IPS LCD capacitive touchscreen of 720 x 1280 pixels. It has 32 GB of internal storage. The storage can be expandable up to 32 GB.

The Micromax Selfie 2 Note gives you 13-megapixel rear camera to capture a good quality image and 8-megapixel in front facing the camera for selfies. It has Non-removable Li-Ion 3000 mAh battery. The sensors in this device are a Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope, fingerprint.

If you facing any lag of your device, network issue, and any software related problem then follow the guide and install this stock firmware. This stock firmware fixes any issue and unbrick Selfie 2 Note Q4601. Stock firmware doesn’t void the warranty of your Micromax Selfie 2 Note Q4601. So let’s go to the instruction to download Micromax Selfie 2 Note Firmware.

Micromax Selfie 2 Note Q4601 Firmware Details:-

  • Android Version: Android 7.0
  • Android Name: Nougat
  • UI Version: Stock UI
  • Release Date: 20.06.2017
  • Device name: Micromax Selfie 2 Note
  • Model number: Q4601
  • Country: All.
  • Status: Official
  • File Size: 1.5 GB
  • Firmware link: Micromax_Q4601_MT6737M_SW_V7_HW_V1.0_06202017.zip

Guide To Install Firmware:-

  • Extract downloaded.zip (firmware file).
  • Install USB drivers.
  • Now open the Smart Phone Flash tool (flash_tool.exe).
  • Then click the Scatter-loading button and browse and select the extracted firmware [scatter.txt] file which you have already downloaded.
  • Now hit the download button.
  • Switch off your phone and connect your phone to the PC by pressing vol down key.
  • After the flashing, a green tick will appear.
  • Disconnect your phone and turn it on.
Also Read  Install B370 Huawei Mate S Android 6.0 OTA [Europe]
You May Also Like:

If you want complete flashing method with video guide then visit this link ⇒ Here

Note: The first time it takes 5-10 minutes to boot.

If you face any problem please comment below, we will happy to help you.

Leave A Reply

Your email address will not be published.