The official Doogee X53 Stock Firmware is here with driver tool and guide. Doogee X53 is now available on the market and after release TWRP and root method, you can install lots of mods, custom ROM and much more. To keep your device safe always save Doogee X53 firmware to repair. You can also update Doogee X53 smartphone and revert back to stock firmware, also If your Device Brick or Bootloop after installing Custom ROM’s, Kernels or anything this firmware will Unbrick Doogee X53.
Download Doogee X53 Stock Firmware
If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for Doogee X53. By installing this stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Doogee X53. Stock firmware doesn’t void the warranty of your device. The Doogee X53 Firmware is now available for all regions with play store. So let’s go the instruction to download the Firmware.
Doogee X53 Specification:
This year, Doogee released Doogee X53 with Android 7.0 (Nougat). This device runs on 1.3 GHz octa-core MediaTek MT6580M processor and it comes with 1 GB of RAM. This device comes with a 5.3 inches FWVGA capacitive touchscreen with 480 x 960 pixels. It has 16 GB of internal storage.
This device brings the Dual 5.0-Megapixel + .5.0-Megapixel rear camera to capture good quality images and 2.0-Megapixels front-facing camera for the selfies. The device powered by Non-removable Li-Po 2200 mAh battery. It has a G-sensor and Proximity sensor.
Firmware Details:
- Android Version: Android 7.0
- Android Name: Nougat
- UI Version: Stock UI
- Device name: Doogee X53
- Country: All.
- Status: Official
Download Doogee X53 Firmware
We have uploaded the latest Doogee X53 firmware, SP Flash Tool and MTK driver so you can download directly from our site. This firmware helps you to many software issues and also unbrick Doogee X53.
[table id=46 /]
Guide To Install Firmware:
- Download Tool, Driver, Firmware
- Then extract firmware.zip, Tool, driver.
- Now install USB drivers.
- After that open the Smart Phone Flash tool (flash_tool.exe).
- Then click the Scatter-loading button and browse and select the extracted firmware [MT6580_Android_scatter.txt] file which you have already downloaded.
- Now hit the download button.
- Switch off your phone and connect your phone to the PC by pressing vol down key.
- After the flashing, a green tick will appear.
- Disconnect your phone and turn it on.
Note: The first time it takes 5-10 minutes to boot.